Model Is SR-YPB22A-1 Rendering Material Pump Material Transfer Pump
1. GM PVC material transfer PAC pump diaphragm metering pump chemical dosing pump is compact structure, no leakage, safe operation and easy to maintain.
2. The flow can be adjusted by controling the speed regulating handwheel. And the multi-layer composite structure diaphragm has longer service life.
3. Medium can be corrosive and high viscosity, and should be without solid and with viscosity range of 0.3~800 mm2/s.
4. The chemical dosing pump is widely used in petroleum, chemical industry, spinning, food industry, papermaking, atomic energy, power plants, plastics, pharmacy, water works, environmental protection or other industries.
5. PTFE, PVC, SS304, SS316 materials pump bodies could be chosen to transfer liquids for all kinds of applications.
Among them, the vertical axial flow pump mainly relies on the lift of the blades to guide the fluid to the outlet. It is axially in and axially out, and has the advantages of large flow. 1. Submersible axial flow pump: The motor driving the water pump is a dry fully enclosed submersible three-phase asynchronous motor, which can be immersed in water for long-term operation, and has a series of unparalleled advantages of traditional units. 2. Since the motor and the water pump are integrated, there is no need to carry out the labor-consuming and time-consuming assembly process of the motor, transmission mechanism and the axis of the water pump at the installation site, and the on-site installation is convenient and fast. 3. Due to submerged operation, it can greatly simplify the civil engineering and building structure engineering of the pumping station, reduce the installation area, and save the project cost by 30-40%. 4. Low noise, no high temperature in the pumping station, improving the operating environment, and building an all-underground pumping station as required to maintain the ground environment. 5. The submersible motor adopts double or triple mechanical seal, F grade (temperature resistant 155.
Design Features The mixed flow pump is a "pull-out" structure pump. When inspecting and disassembling the impeller and shaft seal, it is not necessary to disassemble the pipeline connected to the pump body. It is equipped with a precision-machined pump shaft and a bearing lubricated with thin oil, and a protective sleeve is installed in the stuffing box cover. The oil level of the bearing box can be controlled by a constant oil cup. The feet of the pump body can bear any load from the pipeline and transmit it directly to the foundation. In this way, the rotor will not bend because the pump is under load, thus ensuring the best service life of the bearing. Due to the larger flow area, thereby reducing blockage. The direction of rotation of the pump, viewed from the drive end, is clockwise. The power drive can be an electric motor or an internal combustion engine. The pump device can be equipped with a complete air release device, which is conducive to the exhaust of the suction pipeline. Shaft seal Packing seal or double mechanical seal. Material Corrosion-resistant materials.
| equipment name | rendering material pump |
| equipment brand | Jiangsu SunRise |
| model | SR-YPB22A-1 |
| color | red/black |
Product Tags:
|
|
Fire Resistant 22kw 105m3/H Material Transfer Pump Images
|
